Heavy-duty Carbon Arc Gouging machines from 800A to 1200A. IGBT inverter technology delivers high current with up to 60% less power consumption. Arc Force, Hot Start, remote control, and full over-current protection — built for the toughest industrial gouging applications.
Max Welding Current
Duty Cycle
Faster than Manual Welding
9001:2015 Certified
Reliable, high-performance and heavy-duty SAW machines designed for continuous industrial welding operations.
Specially engineered for heavy industrial welding. The Magnus Series delivers reliable CC/CV output for ARC/MMA and MIG/MAG (GMAW) applications from 250A to 600A — built with advanced MODULE IGBT inverter technology for energy efficiency and arc stability.
ENDEAVOUR Series
Input: 3Ph, 415VAC
Current @ 60%: 1000Amps
Current @ 100%: 770Amps
ENDEAVOUR Series
Input: 3Ph, 415VAC
Current @ 60%: 1250Amps
Current @ 100%: 970Amps
Welding Tractor
Input: Supply from machine
Digital Panel Control
Current @ 100%: 1000Amps
Recovery System
Input: 3Ph, 415VAC
Weight : 105KG (Approx)
Submerged Arc Welding is an automatic arc welding process where the arc is formed between a continuously fed wire electrode and the workpiece — entirely under a blanket of granular flux.
The flux layer shields the arc from atmosphere, eliminates spatter, and produces a clean, deep-penetration weld consistently. This makes SAW ideal for thick plates and long-seam welding where manual processes cannot match the quality or speed.
Unlike SMAW (Arc / Stick Welding) or MIG Welding, SAW requires minimal operator intervention and is best suited for semi-automatic or fully automatic production lines.
Continuous wire electrode is automatically fed into the weld joint by the SAW tractor head.
Granular flux is deposited ahead of the arc, covering the weld pool completely.
Arc burns beneath flux — no UV radiation, no spatter, deep penetration achieved.
Unfused flux is recovered by the Flux Recovery System and reused — reducing waste.
Built for continuous heavy-duty operation where consistency, speed, and weld quality cannot be compromised.
Up to 3x faster deposition compared to manual arc welding — ideal for high-volume production lines.
Welds thick plates and heavy structures in fewer passes, reducing time and heat distortion.
Constant Current and Constant Voltage modes — suitable for diverse wire and flux combinations.
Compatible with SAW tractors, Column & Boom setups, welding rotators, and positioners.
Comprehensive protection: over-current, over-temperature, under/over voltage safeguards built-in.
Reclaims unfused flux automatically — reduces consumable wastage and lowers operating cost.
| Parameter | SAW (Submerged Arc Welding) | MIG Welding | ARC / Stick Welding (SMAW) |
|---|---|---|---|
| Best For | Thick plates, pressure vessels, long continuous seams | Medium fabrication, thin to medium thickness materials | Site work, maintenance, repair jobs, thin to medium materials |
| Deposition Rate | Very High | High | Medium |
| Penetration Depth | Very Deep | Medium | Medium |
| Automation | Fully Automatic | Semi-Automatic / Fully Automatic | Manual |
| Operator Skill Required | Low (Machine-Driven Process) | Medium | High |
| Spatter / Fumes | Minimal (Arc Protected Under Flux) | Low | Medium to High |
| Position Flexibility | Flat & Horizontal Positions | All Welding Positions | All Welding Positions |
| APS Recommended Models | Endeavour 1000 / Endeavour 1250 SAW Systems | MIG Welding Machines & CCCV Series | Discover ARC Series / Genesis ARC Series |
| Certification / Compliance | Scope | Relevance |
|---|---|---|
| ISO 9001:2015 | Complete manufacturing facility — Valsad, Gujarat | Quality-controlled production, consistent output standards |
| IS Certified | Applicable Indian Standards for welding equipment | Compliance with BIS standards for Indian market |
| MSME Registered | Advanced Power Sources Limited | Registered Indian manufacturer — supports domestic procurement requirements |
| CE Compliance | Available for applicable export models | European conformity — available on request for export buyers |
50 kg to 10,000 kg load capacity. VFD drive, 0–120° tilt, motorised/hydraulic. For pipe, vessel, and structural welding automation.
Self-aligning and conventional welding rotators for cylindrical vessels, pipes, and tanks. Variable speed, adjustable wheel span.
Articulated welding arm systems for precise torch positioning, reach extension, and operator ergonomics in welding bays.
Compatible with MIG, TIG, and SAW processes for reliable, repeatable industrial performance.
A Submerged Arc Welding (SAW) machine is an industrial welding system that uses flux-covered arc welding for deep penetration and high-quality welds.
It is used in heavy fabrication, shipbuilding, pressure vessels, pipelines, and structural steel welding.
High welding speed, deep penetration, smooth finish, and ideal for thick metal welding
Yes, it is specially designed for thick materials and heavy-duty industrial applications.
Yes, we provide heavy-duty submerged arc welding machines for industrial use across India.
APS welding is always ready to help you. For Sales Enquiries:Contact: +91 9601 444 111For booking service call:Contact: +91 9601 444 222
We design and manufacture all our products and thus we know the best about our products.
We are able to offer international technology and service at optimum prices.
Our team is regularly trained for updates in service techniques and also are constantly update on knowledge and skill.
We ensure you professionally managed sales and after sales support.
Office & Manufacturing Facility:
Survey No 172/1, Paikee 2, OLD GIDC Gundlav, Valsad, Valsad District, GUJARAT – 396035. INDIA.